Master Electrician

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  As a Master Electrician at Continental Diamond Tool, you will be responsible for inspecting, repairing, installing, and maintaining electrical systems, machinery, and equipment across our manufacturing facility. This role ensures all electrical work complies with local, state, and national safety codes and regulations. The ideal candidate will work independently, demonstrate advanced troubleshooting skills, and contribute to the safe and efficient operation of our production environment.

DUTIES:

• Install, maintain, and repair electrical wiring, equipment, and fixtures in accordance with relevant codes

• Perform safety inspections and ensure compliance with NEC and OSHA standards

• Read and interpret blueprints, diagrams, and technical drawings

• Troubleshoot electrical systems and machinery to diagnose issues and implement solutions

• Use power construction equipment, measuring devices, power tools, and testing equipment

• Collaborate with maintenance and engineering teams to support facility upgrades and expansions

• Maintain accurate records of repairs, inspections, and installations

• Mentor junior electricians and support apprenticeship development

• Respond to emergency electrical issues and participate in on-call rotations as needed

BASIC QUALIFICATIONS:

• High school diploma or equivalent required

• Completion of a formal apprenticeship program

• Valid Electrician License required

• Master Electrician certification preferred

• 3–5 years of related experience in a senior or supervisory electrical role

• Familiarity with manufacturing environments and industrial equipment

PREFERRED SKILLS/KNOWLEDGE:

• Proficiency in electrical wiring installation and service upgrades

• Strong understanding of typical electrical codes and safety protocols

• Experience with industrial electrical systems and machinery

• Ability to read and interpret blueprints and schematics

• Skilled in using diagnostic tools and testing equipment

• Familiarity with programmable logic controllers (PLCs) is a plus

PERSONAL ATTRIBUTES:

• Detail-oriented with a strong commitment to safety and quality

• Self-motivated and able to work independently within established procedures

• Effective communicator with strong problem-solving abilities

• Reliable, punctual, and adaptable to changing priorities

• Willingness to take initiative and lead by example

Continental Diamond Tool was established in 1973, in New Haven, Indiana. We are a super abrasive specialist that provides custom cutting, polishing and grinding tools to multiple industries. It is our policy to fully satisfy our customers’ needs and expectations on an on-going basis.

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

  Apply Now

This Job is No Longer Available — See Open Positions

Vitrified Bond Inspection Technician (VB)

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  As a Inspection Technician in our fast-growing Vitrified Bond Department, you will be responsible for ensuring the quality and integrity of vitrified bonded products throughout the manufacturing process. This role involves precise inspection of components before and after firing, proper operation of furnaces, and visual assessment of tooling to maintain high production standards.

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

JOB DUTIES:

• Inspect vitrified bonded products using precision measuring tools such as scales, calipers, and micrometers both before and after firing.

• Load and diagram each furnace level accurately, ensuring the correct firing cycle is selected and executed for each batch.

• Visually inspect tooling for any flaws, imperfections, or damage prior to and following the pressing process.

• Maintain accurate inspection records and report any non-conformities or quality issues.

• Collaborate with production and quality teams to ensure compliance with safety and quality standards.

PREFERRED SKILLS/KNOWLEDGE:

• Proficiency in using precision measuring instruments (scales, calipers, micrometers).

• Familiarity with kiln or furnace operation and firing cycles.

• Ability to read and interpret technical drawings and work instructions.

• Basic mechanical aptitude and understanding of manufacturing processes.

• Experience in quality control or inspection in a production environment

BASIC QUALIFICATIONS:

• Strong attention to detail and commitment to quality.

• Good hand-eye coordination and manual dexterity.

• Sound judgment and decision-making skills.

• Dependable, punctual, and safety-conscious.

• Ability to work independently and as part of a team.

PHYSICAL DEMANDS:

• Manufacturing floor with exposure to heat, dust, and machinery.

• Requires standing for long periods of time , lifting, and handling of materials and tools.

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

Continental Diamond Tool, Inc was established in 1973, in New Haven, Indiana. We are a super abrasive specialist that provides custom cutting, polishing and grinding tools to multiple industries. It is our policy to fully satisfy our customers’ needs and expectations on an on-going basis.

JOB GRADE: 1

5/25

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

Vitrified Pressing Technician (VB)

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  As a Mixing/Pressing Technician in our fast-growing Vitrified Bond Department, you will be responsible for the preparation and production of vitrified bonded products through a series of critical manufacturing processes. Key responsibilities include the precise mixing of abrasive materials and bonding agents, accurate filling and pressing of molds, and the controlled firing and inspection of finished products. This role requires strict adherence to quality and safety standards, routine maintenance of equipment and tooling, and diligent record-keeping. The ideal candidate will demonstrate attention to detail, mechanical aptitude, and a commitment to producing high-quality components in a manufacturing environment.

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

JOB DUTIES:

• Required to read, understand, and follow work orders, formulation sheets and engineering drawing.

• Required to gather the proper materials, accurately weigh, and mix to the correct consistency 

• Able to prepare the mold, clean, fill, level, assemble and press the product to print requirements

• Ability to inspect the product using scales, calipers, and micrometers both before and after firing

• Required to properly load, diagram each level, and run the proper firing cycle of the furnace

• Visually inspect tooling for obvious flaws, imperfection, or damage both pre and post pressing

• Ability to clean, mask, grit blast and prepare cores as required for epoxy mounting

• Ability to properly and safely epoxy mount product to cores

• Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations, and properly using and maintaining PPE 

• Report time and material in manufacturing systems

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Required to read and understand work instructions, paperwork, and drawings

• Highschool diploma or GED

PREFERRED SKILLS/KNOWLEDGE:

• Good hand eye coordination

• Excellent attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Stand for long periods of time

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

Continental Diamond Tool, Inc was established in 1973, in New Haven, Indiana. We are a super abrasive specialist that provides custom cutting, polishing and grinding tools to multiple industries. It is our policy to fully satisfy our customers’ needs and expectations on an on-going basis.

JOB GRADE: 1

8/5

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

CNC Machinist Grade 1

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our  general application here.

SUMMARY:  Produce machined parts by fixturing, setting up, and operating CNC machines; maintaining quality and safety standards; maintaining equipment and tooling; keeping records. 

HOURS: We currently have opportunities available for 1st shift positions. 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

JOB DUTIES:

• Learn to read, understand and follow work orders and blueprints/engineering drawing.

• Learn to measure and verify settings and parts by measuring positions, first-run parts and sample work pieces utilizing: comparator, calipers, micrometers, bore gages, height gages, indicators and other measuring equipment as needed.

• Learn to operate a specific CNC machine in the department

• Learn to edit programs/make small adjustments manually/at the controller

• Selects/Sets up proper work holding for job; Collet, Chuck, or Vise

• Learn to set up and change tooling

• Required to meet standard productivity requirements

• Report time and material in manufacturing systems

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• High school diploma or GED

PREFERRED QUALIFICATIONS:

• Strong conceptual skills

• 1+ years of related experience

• Operate manual machines (lathe, mill, grinder)

• Functional and technical skills

• Excellent verbal communication skills

• Good computer skills; excel, word, ERP systems

• Understanding controls and instrumentation

• Attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Prolonged standing

• Frequently required to walk

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

• Regularly exposed to grease, oils, noise, and coolant.

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 1

  Apply Now

This Job is No Longer Available — See Open Positions

Resin Bond Grinding Operator

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our  general application here.

SUMMARY:  As a Resin Bond Grinding Operator at Continental Diamond Tool, you will responsible for operating and maintaining resin bond grinding machines to produce high-quality precision parts.  This will include tasks such as turning, drilling, grinding and polishing.  This role requires attention to detail, technical expertise, and a commitment to safety and quality standards.

DUTIES:

• Operate resin bond grinding machines to grind and finish precision parts according to specifications.

• Set up and adjust grinding machines, including selecting and installing grinding wheels and adjusting machine settings.

• Required to read, understand, and follow work orders and engineering drawings.

• Ability to inspect the product using scales, calipers, micrometers, bore gages, comparators and other equipment as needed.

• Ability to select the proper work holding and tooling needed for optimum productivity.

• Ability to recognize, trouble shoot and correct noncompliant products

• Maintain a safe and healthy work environment by following standards and procedures, complying with legal regulations, and properly using and maintaining PPE.

• Required to meet standard productivity requirements.

• Inspect finished parts for accuracy and quality, using precision measuring tools such as scales, Calipers, micrometers, bore gauges, comparators and other equipment as needed.

• Perform routine maintenance on grinding machines to ensure optimal performance.

• Collaborate with team members to troubleshoot and resolve production issues.

• Document production activities and maintain accurate records.

• Perform other duties as required.

BASIC QUALIFICATIONS:

• Safely run and use required equipment.

• Required to read and understand work instructions, paperwork, and drawings.

• High school diploma or GED; technical training in machining or grinding preferred.

• Proven experience as a grinding operator, preferably with resin bond grinding machines.

• Strong understanding of grinding processes and techniques.

• Proficiency in using precision measuring tools (e.g., micrometers, calipers).

• Ability to read and interpret technical drawings and specifications.

• Commitment to safety and quality standards.

PREFERRED SKILLS/KNOWLEDGE:

• Manual dexterity and hand-eye coordination.

• Strong mechanical aptitude.

• 3+ years of related experience preferred.

• High level of interpersonal communication skills.

• Good computer skills; excel, word, ERP systems.

• Excellent attention to detail and have sound judgement

PHYSCIAL DEMANDS:

• Stand for long periods of time

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 2

Continental Diamond Tool, Inc was established in 1973, in New Haven, Indiana. We are a superabrasive specialist that provides custom cutting, polishing and grinding tools to multiple industries. It is our policy to fully satisfy our customers’ needs and expectations on an on-going basis.

  Apply Now

This Job is No Longer Available — See Open Positions

Quality Control/Inspection Level 2

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our  general application here.

SUMMARY:  As part of Continental Diamond Tool's Quality Control and Inspection Department, you will play a pivotal role in ensuring adherence to quality standards by approving in-process production and finished products, and meticulously recording quality results. Conduct thorough inspections and checks during the manufacturing process, whether for partially assembled or fully finished products

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m. LEVEL: 2

DUTIES:

• Required to read, understand and follow work orders, process sheets, and engineering drawings.

• Measure and verify parts by measuring dimensions for first-run parts and work pieces utilizing the following equipment: comparator, calipers, micrometers, bore gages, height gages, indicators and other measuring equipment as needed.

• Approves in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to the operator or production supervisor.

• Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work.

• Document inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database.

• Keeps measurement equipment operating by following operating instructions, reporting needed repairs.

• Maintains a safe and healthy work environment by following standards and procedures; complying with legal regulations.

• Responsible for the inspection and, if possible, correction of any RGAs returned

• Ability to inspect and measure any buyouts (cores, molds, diamond rolls) as requested using the required measuring equipment.

• Good PC skills and experience of Microsoft Office

• Report on time and material in manufacturing systems

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Correctly and accurately inspect product using required measuring equipment

• Required to read and understand work instructions, paperwork and drawings

• High school diploma or GED

PREFERRED SKILLS/KNOWLEDGE:

• Strong mechanical aptitude

• 3+ years of related experience

• Functional and technical skills

• Excellent communication skills

• Good computer skills; Excel, Word, ERP, Inspection Software, Keyence Equipment

• Experience with ISO 9001 quality system

• Attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Use of hands, fingers and arms to grasp, feel and reach

• Frequently required to walk

• Standing for long periods of time

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

• Vision abilities required include close vision, color vision, and the ability to adjust focus

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

Continental Diamond Tool, Inc was established in 1973, in New Haven, Indiana. We are a super abrasive specialist that provides custom cutting, polishing and grinding tools to multiple industries. It is our policy to fully satisfy our customers’ needs and expectations on an on-going basis.

JOB GRADE: 1

  Apply Now

This Job is No Longer Available — See Open Positions

Diamond Grinder/Lapper

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our  general application here.

SUMMARY:  To finish grind, within drawing requirements/tolerances, diamond roll profiles, bores and faces.  Machines to be utilized are various grinders such as ring grinders, surface grinders, cylindrical grinders and Universal Heald grinders.  Maintaining quality and safety standards; maintaining equipment and tooling; keeping records.

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

JOB DUTIES:

• Read, understand, and follow work orders and engineering drawings.

• Measures and verifies settings and parts by utilizing; Projector, calipers, micrometers, bore gages, height gages, indicators and other measuring equipment as needed.

• Operate various grinding machines in the department

• Selects tools and grinding wheels for optimum productivity

• Selects/Creates work holding for optimum productivity

• Regularly hold required tolerance

• Produce customer inspection reports

• Meet standard productivity requirements

• Report time and material in manufacturing systems

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Correctly and accurately inspect product using required measuring equipment

• Required to read and understand work instructions, paperwork and drawings

PREFERRED SKILLS/KNOWLEDGE:

• Strong mechanical aptitude

• Maintain required tolerances

• 1+ years of grinding/related experience

• Functional and technical skills

• Excellent communication skills

• Basic computer skills; excel, word

• Attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Prolonged standing

• Regularly required to stoop, kneel, or crouch

• Regularly lift and move up to 50 lbs

• Regularly exposed to grease, oils, noise, and coolant/mist.

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 1

  Apply Now

This Job is No Longer Available — See Open Positions

Finishing Technician (MB)

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  As part of Continental Diamond Tool's Finishing Department you will be responsible for the final machining and grinding of products, including tasks such as turning, milling, drilling, grinding, and polishing. This role requires maintaining quality and safety standards, equipment, and tooling, as well as keeping accurate records.

HOURS:
1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

DUTIES:

• Read, understand, and follow work orders and engineering drawings (GD&T).

• Inspect products using scales, calipers, micrometers, bore gauges, comparators, and other equipment.

• Operate manual lathes, mills, and various grinding machines.

• Select proper work holding and tooling for optimal productivity.

• Complete all Metal Bond orders.

• Achieve ±0.0005” tolerances on forms and required geometry.

• Recognize, troubleshoot, and correct noncompliant products.

• Maintain a safe and healthy work environment by following standards and procedures, complying with legal regulations, and properly using and maintaining PPE.

• Meet standard productivity requirements.

• Report time and material in ERP systems.

• Perform other duties as required independently.

  BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Correctly and accurately inspect product using required measuring equipment

• Required to read and understand work instructions, paperwork, and drawings

• High school diploma, GED, trade school, or apprenticeship.

PREFERRED SKILLS/KNOWLEDGE:

• Excellent manual dexterity.

• Strong mechanical aptitude.

• 5+ years of manual machining experience.

• 2+ years of CNC experience.

• CAD experience preferred.

• Experience with machining composites and metallurgy.

• Management or supervisor experience preferred.

• Welding or soldering experience.

• Metrology experience.

• Problem solving.

• High level of interpersonal communication skills.

• Good computer skills; excel, word, ERP systems.

• Excellent attention to detail and sound judgment.

PHYSICAL DEMANDS:

• Occasionally stoop, kneel, or crouch.

• Stand for long periods of time

• Regularly lift and move up to 50 lbs.

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

Continental Diamond Tool, Inc was established in 1973, in New Haven, Indiana. We are a super abrasive specialist that provides custom cutting, polishing and grinding tools to multiple industries. It is our policy to fully satisfy our customers’ needs and expectations on an on-going basis.

JOB GRADE: 1

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

Environmental Health and Safety Director

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  The Environmental Health and Safety (EHS) Director at Continental Diamond Tool will be responsible for developing, implementing, and overseeing all EHS programs and initiatives to ensure compliance with regulatory requirements and promote a safe and healthy work environment. This full-time role requires a strategic thinker with strong leadership skills and a deep understanding of EHS principles in a manufacturing setting. The candidate must be available during production hours.

DUTIES:

• Develop and Implement EHS Programs: Design and execute comprehensive EHS programs, policies, and procedures to ensure compliance with local, state, and federal regulations.

• Risk Assessment and Management: Conduct regular risk assessments and audits to identify potential hazards and implement corrective actions.

• Training and Education: Develop and deliver EHS training programs for employees at all levels to promote awareness and adherence to safety protocols.

• Incident Investigation: Lead investigations into EHS incidents, accidents, and near-misses, and develop strategies to prevent recurrence.

• Regulatory Compliance: Ensure all manufacturing sites comply with environmental, health, and safety regulations, including OSHA, EPA, and other relevant agencies.

• Continuous Improvement: Drive continuous improvement initiatives to enhance EHS performance and reduce risks.

• Reporting and Documentation: Maintain accurate records and documentation of EHS activities, incidents, and compliance efforts.

• Leadership and Collaboration: Provide leadership and guidance to EHS teams across multiple sites, fostering a culture of safety and collaboration.

PREFERRED SKILLS/KNOWLEDGE:

• Education: Bachelor's degree in Environmental Science, Occupational Health and Safety, Engineering, or a related field. Master's degree preferred.

• Experience: Minimum of 7-10 years of experience in EHS management within a manufacturing environment, with at least 3 years in a leadership role.

• Certifications: Experience with ISO 14001 Environmental Certification, Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or equivalent certifications preferred.

PERSONAL ATTRIBUTES:

• Strong knowledge of EHS regulations and best practices.

• Excellent communication and leadership skills.

• Ability to manage multiple projects and priorities.

• Proficient in EHS software and tools.

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

Continental Diamond Tool was established in 1973, in New Haven, Indiana. We are a super abrasive specialist that provides custom cutting, polishing and grinding tools to multiple industries. It is our policy to fully satisfy our customers’ needs and expectations on an on-going basis.

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

Core Preparation Technician (RB)

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  Responsible for the cleaning and preparing of cores for the resin bonded product.  This will include tasks such as washing/drying, sandblasting, and the masking of cores, application of resin glue on the cores.  All will be required to maintain quality and safety standards, maintaining equipment and tooling, keeping records. 

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

 JOB DUTIES:

• Required to read, understand, and follow work orders, formulation sheets and engineering drawing.

• Ability to inspect the product using scales, calipers, and micrometers

• Ability to operate and interpret hardness testing equipment.

• Visually inspect cores for obvious flaws, imperfection, or damage

• Ability to clean, mask, sandblast and prepare cores as required prior to pressing

• Responsible for cleaning and preparation of recoat hubs as needed

• Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations, and properly using and maintaining PPE

• Report time and material in manufacturing systems

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Required to read and understand work instructions, paperwork, and drawings

• Highschool diploma or GED

PREFERRED SKILLS/KNOWLEDGE:

• Good hand eye coordination

• High level of interpersonal communication skills

• Good computer skills; excel, word, ERP systems

• Excellent attention to detail and have sound judgment

• Good time management/organizational skills

PHYSICAL DEMANDS:

• Stand for long periods of time

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

• Potential for long shifts and/or weekends

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 1

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

Manual Lathe/Grinding Operator (MB) & (RB)

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  As a Manual Lathe Operator at Continental Diamond Tool, you will play a key role in the manual machining and grinding of our products to ensure that they meet the highest standards. This will include tasks such as turning, milling, drilling, grinding and polishing by hand. It is important to note that this process is manual, not computerized, underlining the significance of your craftsmanship. All will be required to adhere to quality and safety standards, maintain equipment and tooling, and keep accurate records. Your dedication to your craft will be instrumental in maintaining the superior quality and excellence of our metal bond products.

DUTIES:

• Required to read, understand, and follow work orders and engineering drawings.

• Ability to inspect the product using scales, calipers, micrometers, bore gages, comparators and other equipment as needed.

• Required to operate manual lathes/mills and various grinding machines. 

• Ability to select the proper work holding and tooling needed for optimum productivity

• Ability to use scales, calipers, micrometers, and similar measuring equipment

• Ability to recognize, trouble shoot and correct noncompliant product

• Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations, and properly using and maintaining PPE

• Required to meet standard productivity requirements

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Correctly and accurately inspect product using required measuring equipment

• Required to read and understand work instructions, paperwork, and drawings

• High school diploma or GED

PREFERRED SKILLS/KNOWLEDGE:

• Good hand eye coordination

• Strong mechanical aptitude

• 3+ years of related experience

• High level of interpersonal communication skills

• Good computer skills; excel, word, ERP systems

• Excellent attention to detail and have sound judgement

PHYSCIAL DEMANDS:

• Stand for long periods of time

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 2

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

Pressing Technician (RB) - First Shift

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  Responsible for the pressing/firing, inspection, and mounting of resin bonded product.  This will include tasks such as cleaning and assembly of the molds, filling and pressing/firing of product.  All will be required to maintain quality and safety standards, maintaining equipment and tooling, keeping records. 

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

JOB DUTIES:

• Required to read, understand, and follow work orders, formulation sheets and engineering drawing.

• Required to clean molds and properly store them

• Able to load and press powdered cores

• Able to extract pressed cores from molds

• Required to press DW product

• Able to use “old style” molds to press abrasive sections

• Ability to inspect the product using scales, calipers, and micrometers

• Visually inspect tooling for obvious flaws, imperfection, or damage both pre and post pressing

• Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations, and properly using and maintaining PPE

• Report time and material in manufacturing systems

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Required to read and understand work instructions, paperwork, and drawings

• High school diploma or GED

PREFERRED SKILLS/KNOWLEDGE:

• Good hand eye coordination

• High level of interpersonal communication skills

• Good computer skills; excel, word, ERP systems

• Excellent attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Use of hands, fingers, and arms to grasp, feel and reach

• Frequently required to walk

• Stand for long periods of time

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

• Vision abilities required include close vision, color vision, and the ability to adjust focus

• Potential for long shifts and/or weekends

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 1

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

Saw /Receiving Technician

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  Responsible for sawing material for all product lines and projects as specified on drawings and/or job paperwork. This will include tasks such as using several types of band saws and cut-off saws, maintain quality and safety standards, maintaining equipment and tooling, keeping records. 

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

DUTIES:

• Required to read, understand and follow work orders and engineering drawing.

• Measures and verifies material type and length utilizing tape measure, scales, and calipers

• Selects the proper equipment, blades, speeds, and feeds to safely and efficiently cut material

• Utilizes overhead lifting equipment, chains, slings, and magnetics to safely lift, move and store materials

• Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations.

• Report time and material in manufacturing systems

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Required to read and understand work instructions, paperwork, and drawings

• Strong time management and organizational skill

• Correctly and accurately inspect product using required equipment

• Highschool diploma or GED

PREFERRED SKILLS/KNOWLEDGE:

• Strong mechanical aptitude

• 3+ years of related experience

• Functional and technical skills

• Excellent communication skills

• Attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Frequently required to walk

• Standing for long periods on time

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 1

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

Shipping Clerk

SUMMARY:  Continental Diamond Tool is seeking a detail-oriented and reliable Shipping Clerk to join our manufacturing team specializing in superabrasive products (e.g., diamond and CBN tools). You will be responsible for preparing, packaging, and coordinating the shipment of high-precision industrial products to domestic and international customers, ensuring accuracy, compliance, and timely delivery.

JOB DUTIES:

• Prepare and package superabrasive tools and components for shipment according to company and customer specifications.

• Generate shipping labels, bills of lading, and customs documentation using ERP and shipping software (e.g., UPS, FedEx, DHL, freight carriers).

• Inspect outgoing shipments to ensure product quality, correct quantities, and proper labeling.

• Coordinate with production, quality control, and customer service teams to meet shipping deadlines.

• Maintain accurate shipping records and update inventory systems.

• Schedule pickups and track shipments to ensure on-time delivery.

• Handle hazardous materials and international shipping documentation when required.

• Assist with receiving and inventory control as needed.

PREFERRED SKILLS/KNOWLEDGE:

• High school diploma or GED (required)

• Associate degree or vocational training (preferred)

• 2+ years of experience in shipping/receiving, preferably in a manufacturing or industrial setting

• Experience packaging and shipping products

• Familiarity with superabrasive materials or precision tooling

• Functional and technical skills

• Proficient in Microsoft Office (Excel, Word) and ERP systems (e.g., SAP, Oracle, NetSuite)

• Knowledge of domestic and international shipping regulations, including export compliance and hazardous materials handling

• Ability to lift up to 50 lbs and operate forklifts or pallet jacks (certification preferred)

• Ability to safely run and use required equipment

• Ability to correctly and accurately inspect, engrave, and package product

• Ability to read and understand work instructions, paperwork, and drawings

BASIC QUALIFICATIONS:

• Strong organizational skills

• Attention to detail

• Sound judgment

• Excellent communication skills

• Good computer literacy

• Dependability and reliability

• Ability to work independently and as part of a team 

Continental Diamond Tool was established in 1973, in New Haven, Indiana. We are a super abrasive specialist that provides custom cutting, polishing and grinding tools to multiple industries. It is our policy to fully satisfy our customers’ needs and expectations on an on-going basis.

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

Pressing Technician (RB) & (VB)

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  As a Pressing Technician in our Resin Bond or Vitrified Bond Department, you will be making essential tools for some of the world’s most high-tech industries. You will be responsible for the pressing/firing, inspection, and mounting of resin bonded (RB) or vitrified bonded (VB) products through tasks such as cleaning and assembly of the molds, filling and pressing/firing of product. All will be required to adhere to quality and safety standards, maintain equipment and tooling, and keep accurate records. You will play an essential role in our company's commitment to excellence and ongoing success.

HOURS:
We currently have opportunities available for both full-time 1st and 3rd shift positions. 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m. 3rd shift hours are Monday through Thursday, 8 p.m. to 6 a.m. There is a $1.50/hr. shift premium for these full-time positions with opportunities for overtime. Check out this video from one of our 3rd shift managers to learn more about what it's like working nights at CDT.

  JOB DUTIES:

• Required to read, understand, and follow work orders, formulation sheets and engineering drawing.

• Required to clean molds and properly store them

• Able to load and press powdered cores

• Able to extract pressed cores from molds

• Required to press DW product

• Able to use “old style” molds to press abrasive sections

• Ability to inspect the product using scales, calipers, and micrometers

• Visually inspect tooling for obvious flaws, imperfection, or damage both pre and post pressing

• Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations, and properly using and maintaining PPE

• Report time and material in manufacturing systems

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Required to read and understand work instructions, paperwork, and drawings

• High school diploma or GED

PREFERRED SKILLS/KNOWLEDGE:

• Good hand eye coordination

• High level of interpersonal communication skills

• Excellent attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Frequently required to walk

• Stand for long periods of time

• Regularly lift and move up to 50lbs

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 1

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

Soldering/Masking Technician

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  As a Soldering/Masking Technician at Continental Diamond Tool, you will be responsible for securing the proper wire connections for products entering the plating process. This will include tasks such as chemical cleaning of the part, soldering, and any additional masking of the product using paint/stop-off, vinyl tape and/or masking film. All will be required to adhere to quality and safety standards, maintain equipment and tooling, and keep accurate records. Your contributions will be important in ensuring that our electroplating process maintains the highest levels of safety, quality, and efficiency.

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

JOB DUTIES:

• Required to read, understand, and follow work orders and engineering drawing.

• Able to prepare, fixture and process product through the soldering process

• Visually inspect tooling for obvious flaws, imperfection, or damage both pre and post masking/soldering

• Properly label tooling with company name, mesh size, abrasive type, any special notes, and “Rush” orders.

• Ability to properly secure required wire connection for the plating process

• Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations, and properly using and maintaining PPE

• Report time and material in manufacturing systems

• Participate in regularly scheduled acid changes

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Required to read and understand work instructions, paperwork, and drawings

• High school diploma or GED

PREFERRED SKILLS/KNOWLEDGE:

• Good hand eye coordination

• High level of interpersonal communication skills

• Good computer skills; Excel, Word, ERP systems

• Excellent attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Regularly exposed to nickel plating chemistries, solder flux, mineral spirits and stop-off maskants

• Frequently required to walk

• Sit for long periods of time

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 1

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

Mixing/Pressing Technician (MB)

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  Responsible for the mixing, pressing, inspection, and firing of metal bonded product. This will include tasks such as mixing of abrasive and bonds, filling and pressing of product using molds, and the firing and inspection of product. All will be required to maintain quality and safety standards, maintaining equipment and tooling, keeping records.

HOURS:
1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

DUTIES:

• Required to read, understand, and follow work orders, formulation sheets and engineering drawing.

• Required to gather the proper materials, accurately weigh, and mix to the correct consistency. 

• Able to prepare the mold, clean, fill, level, assemble and press/fire the product to print requirements.

• Ability to inspect the product using scales, calipers, and micrometers both before and after firing.

• Visually inspect tooling/molds for obvious flaws, imperfection, or damage both pre and post pressing.

• Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations, and properly using and maintaining PPE.

• Report time and material in manufacturing systems.

• Perform other duties as required.

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Required to read and understand work instructions, paperwork, and drawings

• High school diploma or GED

PREFERRED SKILLS/KNOWLEDGE:

• Good hand eye coordination

• High level of interpersonal communication skills

• Good computer skills; Excel, Word, ERP systems

• Excellent attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Use of hands, fingers, and arms to grasp, feel and reach

• Frequently required to walk

• Stand for long periods of time

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50 lbs.

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 1

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

Sieving/Sizing Technician

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  Continental Diamond Tool is looking for a Sieving and Sizing Technician to join our team. In this role, you’ll be responsible for a range of tasks, including acid cleaning, sieving, weighing, and the precise labeling of abrasive containers. You will be instrumental in ensuring that our high standards of quality and safety are meticulously maintained. Moreover, your role will involve detailed record-keeping, contributing to the efficiency and effectiveness of our operations. Join us to be a part of a dynamic team, dedicated to excellence and innovation.

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

DUTIES:

• Required to read, understand, and follow work orders, processes, and procedures.

• Able to use chemicals, sieving and sizing equipment to process material safely and accurately

• Perform quality checks on batches of abrasives per ANSI standards; B74232002, B74162002

• Ability to correctly and accurately weigh and label product using required equipment

• Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations, and properly using and maintaining PPE

• Report time and material in manufacturing systems

• Participate in regularly scheduled acid changes

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Required to read and understand work instructions, paperwork, and drawings

• High school diploma or GED

PREFERRED SKILLS/KNOWLEDGE:

• Good hand eye coordination

• Strong mechanical aptitude

• High level of interpersonal communication skills

• Excellent attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Frequently required to walk

• Stand for long periods of time

• Regularly lift and move up to 50lbs

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 1

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

CNC Machinist- Grade 2

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  Join our team as a CNC Machine Operator at Continental Diamond Tool. In this role, you will be the backbone of our manufacturing process, responsible for setting up, operating, and maintaining CNC machines to produce high-quality machined parts. The position requires a commitment to quality and safety standards, caring for equipment and tools, and precise record-keeping. Your skill will help shape the exceptional quality and craftsmanship our customers trust.

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

JOB DUTIES:

• Ability to read, understand and follow work orders and blueprints/engineering drawing.

• Ability to measure and verify settings and parts by measuring positions, first-run parts and sample work pieces utilizing:  comparator, calipers, micrometers, bore gages, height gages, indicators and other measuring equipment as needed.

• Ability to operate multiple CNC machines in the department

• Learn to edit and program manually/at the controller

• Selects/Sets up proper work holding for job; Collet, Chuck, or Vise

• Required to set up, change tooling, and load programs from computer

• Required to meet standard productivity requirements

• Report time and material in manufacturing systems

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Correctly and accurately inspect product using required measuring equipment

• Ability to read and understand work instructions, paperwork and drawings

• High school diploma or GED

PREFERRED QUALIFICATIONS:

• Strong conceptual skills

• 2+ years of related experience

• Operate manual machines (lathe, mill, grinder)

• Functional and technical skills

• Excellent verbal communication skills

• Good computer skills; excel, word, ERP systems

• Understanding controls and instrumentation

• Attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Prolonged standing

• Use of hands, fingers and arms to grasp, feel and reach

• Frequently required to walk

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

• Vision abilities required include close vision, color vision, and the ability to adjust focus

• Regularly exposed to grease, oils, noise, and coolant.

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 2

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.

CNC Machinist- Grade 3

 

This Position Is No Longer Available

We are not currently hiring for this role. However, if you're still interested in joining our team, you can complete our general application here.

 

SUMMARY:  Join our team as a CNC Machine Operator at Continental Diamond Tool. In this role, you will be the backbone of our manufacturing process, responsible for programming, fixturing, setting up, operating, and maintaining CNC machines to produce high-quality machined parts. The position requires a commitment to quality and safety standards, caring for equipment and tools, and precise record-keeping. Your skill will help shape the exceptional quality and craftsmanship our customers trust.

HOURS: 1st shift hours are Monday through Friday, 6 a.m. to 2 p.m.

JOB DUTIES:

• Ability to read, understand and follow work orders and blueprints/engineering drawing.

• Ability to measure and verify settings and parts by measuring positions, first-run parts and sample work pieces utilizing:  comparator, calipers, micrometers, bore gages, height gages, indicators and other measuring equipment as needed.

• Ability to operate all of the CNC machines in the department

• Required to operate machines simultaneously

• Required to program multiple CNC machines manually/at the controller

• Required to creatively machine complex parts; either complex sequence and/or set-up; complex programming

• Select tools for optimum productivity

• Selects/Creates work holding for optimum productivity

• Required to regularly hold .0005” tolerance or better

• Required to meet standard productivity requirements

• Required to train other employees

• Report time and material in manufacturing systems

• Perform other duties as required

BASIC QUALIFICATIONS:

• Safely run and use required equipment

• Correctly and accurately inspect product using required measuring equipment

• Minimum of 5 years of related experience

• Required to maintain +.0005” tolerances or better

• Ability to read and understand work instructions, paperwork and drawings

• High school diploma or GED

PREFERRED QUALIFICATIONS:

• Strong conceptual skills

• 8+ years of related experience

• Operate manual machines (lathe, mill, grinder)

• Functional and technical skills

• Excellent verbal communication skills

• Good computer skills; excel, word, ERP systems

• Understanding controls and instrumentation

• Attention to detail and have sound judgment

PHYSICAL DEMANDS:

• Prolonged standing

• Use of hands, fingers and arms to grasp, feel and reach

• Frequently required to walk

• Seldom required to stoop, kneel, or crouch

• Regularly lift and move up to 50lbs

• Vision abilities required include close vision, color vision, and the ability to adjust focus

• Regularly exposed to grease, oils, noise, and coolant.

BENEFITS:

CDT offers a competitive benefits package. Click here for details.

JOB GRADE: 3

Unfortunately, this position has already been filled. If you'd like to be considered for a similar role at CDT, click apply now.